PS1030 Small Form Factor Power Supply
Rugged 30 Watt DC/DC Small Form Factor Power Supply for Harsh Environments
The PS1030 is a high efficiency, small form factor power supply. It is intended for embedded systems operating in harsh environments. The PS1030 is designed around a standard ETX board outline with a standard 2 mm connector.
Product Features
- 24/28VDC nominal input
- Operates through 6V initial engagement surge
- On board EMI filter - no additional filter required
- Single output (5V and 3.3V options available)
- 30 Watts output
- 90%+ efficiency
- Low power standby/sleep mode
- Inhibit and enable control inputs
- Built-In Test (BIT) status indicator
- Reset/power good indicator
- Output over voltage and over current protection
- Over temperature warning indicator
- Thermal shut down protection
- Nuclear Event Detection (NED) and circumvention
Specifications
|
PS1030 Small Form Factor Power Supply Specifications
|
|
|---|---|
| Operating Temperature | -46°C to +85°C (cold wall) |
| Storage Temperature | -55°C to +105°C |
| Vibration | MIL-STD-810 Method 514, Procedure I; Category 13, 14 and 20 |
| Shock | MIL-STD-810 - Operational: Method 516, Procedure I |
| Altitude | From 1,500 feet (460 meters) below sea level to 60,000 feet (18,300 meters) above sea level; MIL-STD-810, Method 500, Procedure II |
| Rapid Decompression | 8,000 feet (2,440 meters) to 60,000 feet (18,300 meters); MIL-STD-810, Method 500, Procedure III |
| Humidity | 95% RH non condensing; MIL-STD-810, Method 507 |
| Fungus | MIL-STD-810, Method 508 |
| EMI/EMC | MIL-STD-461 CE102 with on board filter |
| ESD | Supports EN61000-4-2 in intended enclosure 15kV max air discharge 8kV contact discharge |
